The hydraulic SICOM compressor (Booster), is a indipendent compression unit, employed to discharge the cylinder trucks. It can work with suction pressures ranging from 5 to 200 bar and outlet pressure of up to 250bar with a maximum lead of 1500 Smc/h
The unit needs few maintenance operations, and it's designed for a continuous service.

Operation work: the direct connection of the gas pistons with the oil one permit that the oil in pressure command (through the piston of the oil) the pistons for the gas compression phase.
The gas piston is a double effect type (compression in both senses); the compressors body consist of three rooms: a central for the oil and two side for the gas.
The valves of the gas are type automatic.

The SICOM booster BV30 use a 22 kW electrical motor power and in cases where it requires a higher flow rate is coupled to a motor 30/37kW. On request it is possible to adopt the solution of the internal combustion engine to the electric motor to overcome. The oil tank capacity is 430 litres

The hydraulic SICOM compressor is manufactured in accordance to the directives:
• 2006/42/CE (directive cars)
• 97/23/EC PEDs (pressure equipment directive)
• 94/9/EC ATEXs (explosive atmosphere)






Last modified on Tuesday, 13 May 2014 01:33